Tech Tip: Updated Quick-Change Hub Removal Tool

Posted by Jim Adams on Apr 5, 2016

The tool used to remove the hubcap on the Quick-Change Hubs has been updated from the small ring to a more substantial handheld tool.

Screen_Shot_2016-04-05_at_11.57.01_AM-233897-edited-477631-edited.png
Screen_Shot_2016-04-05_at_11.57.13_AM-267957-edited-567616-edited.png


Picture3.png


It is also recommended to use Loctite 243 (blue) on the mounting screw for the Quick Change Hubs to eliminate the possibility of the screw loosening over time.

 

 

Topics: All Topics ROVVER X Technical Service Bulletin

Headquarters

111 Canfield Ave
Randolph, NJ 07869

Contact

866.227.9845
mail@envirosight.com

© Envirosight LLC. All rights reserved. Specifications subject to change without notice.

Envirosight, Quickview, Jetscan, Verisight, ROVVER, Digisewer, Haloptic, Outpost, Cleverscan and Preferred Build-outs are trademarks of Envirosight.

Quickview carries patents 6,538,732 and 7,009,698; others pending.

Privacy PolicyTerms of Use