Why Do Sewers Smell? | Sewer School

While several components of this gas are toxic, they typically will not harm people at the low concentrations that result from sewer gas issues in homes. However, direct exposure to high concentrations of sewer gas, such as through inhaling the gas inside the sewer itself, can cause serious respiratory issues and even death. Symptoms such as headaches, nausea, dizziness or drowsiness can be caused by contact with high concentrations of sewer gas and should receive medical attention immediately. 

Why Do I Smell Sewer Gas in My Home?

The smell of sewer gas inside a building usually indicates a problem with the building’s plumbing system. Sewer gas gets into buildings in several ways. Here are the most common culprits:

• A dry or damaged P-trap: This is the most common cause of sewer odors. P-traps, also known as traps, are U-shaped pipes that connect to a drain on one end and to a line connected to the sewer on the other end. Traps collect a small amount of wastewater which effectively creates a barrier to prevent sewer gas from moving through the drain and into the building. Traps can also dry out and become non-functional when a sink or bath hasn’t been used in a while. 
• A damaged or deteriorated drain line: If a drain line is broken, deteriorated or cracked, sewage may be released directly under the facility instead of being carried away from the building. This is a rare source of sewer gas but can happen with old drains or because of extreme destabilizing events like earthquakes.
• A blocked roof plumbing vent: Buildings have vent systems made specifically for the plumbing. They are meant to allow sewer odors to escape from plumbing systems. If a facility’s vent is blocked, odors can’t be released and start building up inside the facility.
• A broken seal around a toilet: Water or other waste can seep through the caulk or wax ring surrounding a toilet, which causes smelly bacteria to grow.

Why Do I Smell Sewer Gas Outdoors?

Municipal sewers, such as street sewers, also experience sewer gas issues. The sulfuric gas can escape through manholes or storm sewer grates, especially those that are further away from pump stations, and into the streets or areas above. As mentioned, sewer gas odors inside buildings are nearly always due to plumbing problems. Dry drain traps in street catch basins, blocks in sewer lines, or the presence of materials that don’t belong in the sewer are other causes of outdoor sewer gas release. These issues are common in older U.S. cities that have combined sewer systems wherein the catch basins for stormwater feed into the same pipes as residential sewage. Outdoor sewer odors can sometimes indicate a sewer main break, so it’s important that municipalities address them promptly.

Why is Sewer Gas Treated?

It’s essential to treat sewer gas once it is detected both because of its potential health risks and because it contains highly flammable or explosive gases. Additionally, dangerous chemicals present in many municipal and private sewer systems can combine with sewer gas, making it all the more unstable. Please note: If you think that high levels of sewer gas have accumulated in your home or building, evacuate the space immediately and contact your local fire department.

How is Sewer Gas Treated?

While there are several temporary solutions for sewer gas, wastewater professionals are needed to solve these problems. Plumbers are the way to go for those dealing with sewer gas in their homes or buildings. Municipalities should inspect nearby wastewater assets to identify blockages, leaks or other damages that might lead to aboveground odor. Rehab, cleaning, and/or chemical smell neutralizers may be recommended.

Ready to get the bigger picture when it comes to wastewater operations? Request Envirosight’s illustrated sanitary sewer system reference poster: