Sewer Exfiltration: The Leaking Enemy

Posted by Venay Sehgal Bhatia on Jul 18, 2017

exfiltration.jpgExfiltration is the leakage of wastewater out of a sanitary sewer system through broken or damaged pipes and manholes. Wastewater that leaks out of defective pipe joints and cracks may contaminate ground and surface water and cause a host of other problems, including pipe structure failures due to erosion of soil support, and ground subsidence due to erosion of underground soil. 

Untreated sewage from exfiltration often contains high levels of suspended solids, pathogenic microorganisms, toxic pollutants, floatables, oxygen-demanding organic compounds, oil and grease, and other pollutants. Sanitary sewer systems are designed to collect and transport wastewater to facilities for proper treatment before it is released back into the environment. However, exfiltration allows for the release of untreated wastewater.

Exfiltration is a big problem facing water and wastewater infrastructure. Its effects can harm public health and the environment and necessitate costly repairs. A study done by the City of Albuquerque, NM staff estimated that their collection system lost 11% of wastewater due to exfiltration. A study done in England documented 20-25% of wastewater exiting the system through exfiltration. In another study, German wastewater professionals estimated a cost of nearly $100 billion to repair their deteriorated sewer infrastructure and combat exfiltration. Major points of exfiltration must be identified and repaired as a part of the regular maintenance of wastewater collection systems.

Identifying and Correcting Exfiltration

Flow monitoring, smoke testing and dye testing are used to detect and measure exfiltration problem areas within a collection system. Once problem areas are identified, municipalities can employ CCTV sewer inspection equipment to prioritize rehabilitation and quantify the severity of exfiltration.

A comprehensive approach to locating defects involves inspecting all aspects of a collection system, including manholes, sewer mains and laterals. Because laterals are the shallowest part of a sewer system and typically have the poorest construction, the EPA recommends that they are inspected while the sewer main is being inspected. Lateral launch systems can be used to inspect both sewer mains and laterals at the same time. Leaking manholes are another source of exfiltration and can be inspected using a manhole scanner or zoom inspection camera.

There are many different rehabilitation technologies available to correct exfiltration sources. These methods include: chemical grouting, cement grouting, sliplining, cured-in-place pipe, fold and form pipe, pipe bursting and point (spot) repair.

Regular inspection of sewer infrastructure can help identify exfiltration early so that steps can be taken to curb it and to repair the damage. Early detection of exfiltration can minimize the environmental impact and scope of remediation required. Check out our comprehensive resource page on exfiltration, inflow and infiltration now:

Learn More

Greater Dublin Strategic Drainage Study: Inflow Infiltration & Exfiltration: https://www.dublincity.ie/sites/default/files/content/WaterWasteEnvironment/WasteWater/Drainage/GreaterDublinStrategicDrainageStudy/Documents/Vol%204%20-%20Chapter%203%20-%20Exfiltration.pdf
Operations and Maintenance of Wastewater Collection Systems, Volume 1, Seventh Edition

Topics: All Topics Workflow Sewer Inspections ROVVER X Quickview Lateral Launch Quick-Lock Stormwater Management Point Repair Manhole Inspection Resources Exfiltration Preventative Maintenance